The Delfield Company Refrigeration Equipment 18648BUC

Clean the gasket with warm soapy water

Avoid using full strength cleaning products on the gasket

Ensure no sharp tools or knives are used during cleaning

Check if the gasket needs replacement

Remove the old gasket by pulling it out of the groove

Press the new gasket into place

Remove product from the rail to the refrigerated base

Turn off the rail to save energy and defrost

Ensure the on/off switch is shut off for standard wrapped refrigerated rail units

Ensure the on/off switch is shut off for LiquiTec rail units

Check the low-pressure control setting for standard wrapped refrigerated rail units

Check the thermostat setting for LiquiTec rail units

Clean the interior with soap and warm water

Was the interior cleaning sufficient?

Use ammonia and water or a nonabrasive liquid cleaner if necessary

Clean the exterior with soap and warm water

Rub with the grain of the stainless steel

Did you avoid using abrasive cleaners?

Ensure all acidic items are stored properly

Are all pans in place during operation?

Is the unit operated with minimal door openings?

Are products removed from the top section overnight?

Ensure pans remain in the unit while empty

Ensure the refrigeration unit is turned off

Select the cleaning method used

Inspect the condenser fins for dust, dirt, and grease

Check for any remaining debris on the condenser fins