The Delfield Company Refrigeration Equipment 18660BST

Pull the track out to 1.50” to 2.00” (3.8cm to 5.0cm)

Line up the rear white roller with the half moon notch

Rotate the track away from the outer track profile

Choose cleaning method for intermediate tracks

Wash the intermediate track ensuring each roller is thoroughly cleaned

Inspect the hinges for any signs of looseness or sagging.

Tighten the screws that mount the hinge brackets to the frame if any looseness is detected.

Are the doors properly aligned and closing smoothly?

Is there any obstruction in the storage area that could restrict airflow?

Ensure no hot pans are placed on/against the blue ABS liner.

Avoid throwing items into the storage area.

Ensure the refrigeration unit is turned off

Gather necessary cleaning tools

Select the cleaning method used

Inspect the condenser fins for dust, dirt, and grease

Is the condenser coil clean and free of blockages?

Describe any persistent issues or observations

Remove product from the rail to the refrigerated base

Turn off the rail to save energy and defrost it

Ensure the on/off switch is shut off for standard wrapped refrigerated rail units

Ensure the on/off switch is shut off for LiquiTec rail units

Check the low-pressure control setting for standard wrapped refrigerated rail units

Check the thermostat setting for LiquiTec rail units

Clean the gasket with warm soapy water

Avoid using full strength cleaning products on the gasket

Ensure no sharp tools or knives are used during cleaning

Remove the old gasket by pulling it out of the groove

Press the new gasket into place in the groove