The Delfield Company Refrigeration Equipment 18699BST

Remove product from the rail to the refrigerated base

Turn off the rail unit to save energy and defrost

Verify control settings for rail temperature

Shut off the on/off switch for standard wrapped rail units

Shut off the on/off switch for LiquiTec rail units

Pull the track out to the specified distance (1.50” to 2.00” or 3.8cm to 5.0cm)

Line up the rear white roller with the half moon notch in the outer profile

Rotate the track away from the outer track profile to free the intermediate profile

Cleaning Intermediate Drawer Tracks

Choose cleaning method for intermediate tracks

Wash the intermediate track ensuring each roller is thoroughly cleaned

Prepare warm soapy water for cleaning

Clean the gasket with the prepared solution

Avoid using full strength cleaning products

Avoid using sharp tools or knives

Check if gasket replacement is needed

Replace the gasket if necessary

Understanding Stainless Steel Properties

Acknowledge the properties of stainless steel and its composition

Understand the importance of the chromium protective layer

Gather appropriate cleaning materials

Ensure no steel pads, wire brushes, or scrapers are used

Use soap and water for routine cleaning

For extreme stains, use non-abrasive cleaner and plastic scrub pad

Ensure the refrigeration unit is turned off

Gather necessary cleaning tools

Inspect the condenser coil for blockage

Is the condenser coil extremely dirty?

Clean the condenser coil with a vacuum cleaner or stiff brush

Use a condenser cleaner if necessary