The Delfield Company Refrigeration Equipment 186114PTB

Prepare warm soapy water for cleaning

Clean the gasket with warm soapy water

Avoid using full strength cleaning products on the gasket

Ensure no sharp tools or knives are used during cleaning

Check if gasket needs replacement

Remove the old gasket by pulling it out of the groove

Press the new gasket into place

Understanding Stainless Steel Properties

Acknowledge the properties of stainless steel and its composition

Understand the importance of the chromium protective layer

Ensure the following cleaning materials are available

Confirm no steel pads, wire brushes, or scrapers will be used

Use soap and water for routine cleaning

For extreme stains or grease, use a non-abrasive cleaner and plastic scrub pad

Ensure all acidic items are stored properly

Are all pans in place during operation?

Is the unit operated with minimal door openings?

Is the top section free from overnight storage?

Remove products from pans for overnight storage

Clean the interior with soap and warm water

Was the interior sufficiently cleaned with soap and warm water?

Use ammonia and water or a nonabrasive liquid cleaner if needed

Clean the exterior with soap and warm water

Was the exterior sufficiently cleaned with soap and warm water?

Use ammonia and water or a nonabrasive liquid cleaner if needed

Rub with the grain of the stainless steel

Remove product from the rail to the refrigerated base

Turn off the rail to save energy and defrost

Ensure the on/off switch is shut off for standard wrapped refrigerated rail units

Ensure the on/off switch is shut off for LiquiTec rail units

Check the low-pressure control setting for standard wrapped refrigerated rail units

Check the thermostat setting for LiquiTec rail units