DEKEMA Dental-Keramiköfen Dental Porcelain Furnace Austromat 624i

Read section 2 Safety, particularly section 2.4 hazards

Ensure heating element and thermocouples are not damaged

Use DEKEMA calibration set specific to the furnace

Use insulation table for calibration

Perform a cleaning firing before calibrating

Are the side walls of the top furnace housing warm to the touch?

Review hazards listed in section 2.4

Technical Servicing and Repairs

Is technical servicing or repair necessary?

Ensure only authorized professionals perform servicing or repairs

Has the self-check program been run regularly?

Is there a recommendation to change the heating element?

Ensure the firing furnace is warmed up by running several firing programs or a cleaning firing.

Enter the number of firings completed since the last check program.

Has the device displayed a recommendation to start the self-check program?

In the 'Setup' menu, select the program 'Check program', and tap on [Start].

Save the results of the self-check in a diagnosis file.

Did the diagnostic data reveal any issues with processing firing programs?

Be aware of the hazards listed in section 2.4

Clean the housing and control elements

Use a soft cloth moistened with a mild cleanser

Avoid using scouring agents, scouring pads or solvents such as alcohol, gasoline or acetone

Keep the sealing ring of the lift seat free of dust

Use a brush with a receptacle for ceramic dust