Burton Medical Medical Light A103FL

Ensure the light is turned off and unplugged

Remove pods to access screws (if applicable)

Remove screws to detach top housing

Use a soft cloth to wipe corners and surfaces

Ensure no components inside the light head are bent or damaged

Unplug the power cord before replacing fuses.

Use a flat screwdriver to open the fuse holder and replace the fuse(s).

Disconnect power to the lamp circuit at the main breaker before replacing the fuse.

Use a flat screwdriver to open the fuse holder and replace the fuse.

Ceiling Versions 100V, 230V, and 240V

Remove the ceiling dome by loosening the two set screws on the locking ring.

Replace the fuse and re-assemble in the opposite order.

WARNING: Maintenance Schedule Suggestion

Adjust spring arm tension if needed

Tighten bolts in ceiling / wall if needed

Remove the pods to access the screws holding the housing together

Use a wrench to tighten the nuts on each shaft

Rotate the light head to verify correct friction

Ensure the fixture is cool before replacing the bulb

Confirm the power is off before replacing the bulb

Use gloves or a dry cloth to handle the bulb

Use a small Phillips screwdriver to loosen the retaining screw at the pod

Unscrew the bulb retaining ring

Pull the socket with the bulb out by pulling the wires