Burton Medical Medical Light A53W

Ensure the light is turned off and unplugged

Remove pods to access screws (if applicable)

Remove screws to detach top housing

Use a soft cloth to wipe corners and surfaces

Ensure no components inside the light head are bent

Unplug the power cord before replacing fuses

Use a flat screwdriver to open the fuse holder and replace the fuse(s)

Disconnect power to the lamp circuit at the main breaker before replacing the fuse

Use a flat screwdriver to open the fuse holder and replace the fuse

Ceiling Versions 100V, 230V, and 240V

Remove the ceiling dome by loosening the two set screws on the locking ring

Replace the fuse and re-assemble in the opposite order

Remove the plastic cap covering the rotating mechanism by pulling it away from the assembly.

Use a common screwdriver to adjust the screw.

Does the lighthead remain balanced when moved slightly up or down at mid-range?

Snap the plastic cap back into position.

WARNING: Maintenance Schedule Suggestion

Remove top housing and clean accessible parts

Check and adjust friction between light head and yoke shaft if needed

Ensure all tools are removed from the work area

Verify that the light functions correctly after maintenance

WARNING: Maintenance Schedule Suggestion

WARNING: Equipment Functionality

Light Movement and Security Check

Check that the light is easy to move in its range of movement, and that it holds its position without drifting

Check that all components appear secure

Is the light functioning properly after the checks?

Describe any issues found during the check