Burton Medical Medical Light A50W

Power off the equipment and secure it from being switched on again

Ensure only approved cleaning agents are used

Use a soft cloth dampened with a mild detergent solution for basic cleaning of all surfaces on the AIM luminaires

For stubborn stains, use a soft cloth soaked in isopropyl alcohol

WARNING: Maintenance Schedule Suggestion

Light Movement and Position Check

Check all components for security

Unplug the power cord before replacing fuses

Use a flat screwdriver to open the fuse holder and replace the fuse(s)

Disconnect power to the lamp circuit at the main breaker before replacing the fuse

Use a flat screwdriver to open the fuse holder and replace the fuse

Ceiling Versions 100V, 230V, and 240V

Remove the ceiling dome by loosening the two set screws on the locking ring

Replace the fuse and re-assemble in the opposite order

Ensure the fixture is cool before replacing the bulb.

Verify the power is turned off before starting the replacement.

Use a small Phillips screwdriver to loosen the retaining screw at the pod.

Slide the bulb/socket assembly back and away from the wire retainer.

Gently wiggle the bulb to separate it from the socket.

Use gloves or a dry tissue when replacing the bulb. Pull it straight out of the socket.

Check and adjust spring arm tension if needed

Check and tighten bolts in ceiling / wall