

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Yamaha Vehicle YXC70VPHM
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Coolant Level Check
Coolant Level Inspection
Park the vehicle on a level surface.
Wait for the engine to cool for an accurate reading.
Check the coolant level in the coolant reservoir.
Is the coolant level at or below the minimum level mark?
Coolant Refill
Remove the coolant reservoir cap if the level is low.
Add coolant to the maximum level mark.
Install the reservoir cap.
Headlight Bulb Replacement
Removal of Old Bulb
Remove the cover at the rear of the headlight by pulling it off.
Remove the headlight bulb cover by pulling it off.
Disconnect the headlight coupler.
Unhook the headlight bulb holder.
Wait for the headlight bulb to cool before touching or removing it.
Remove the burnt-out bulb by pulling it out.
Installation of New Bulb
Place a new headlight bulb into position, and then secure it with the bulb holder.
300 Hourly / 12 Monthly Vehicle Maintenance
Engine Maintenance
Replace engine oil filter cartridge
Gear Oil Maintenance
Change final gear oil
Change differential gear oil
Suspension and Steering System
Check front and rear suspension operation and for oil leakage
Correct suspension issues if necessary
Check steering system operation and for looseness
Tire Replacement
Preparation
Ensure the vehicle is on a flat surface
Engage the parking brake
Turn off the engine
Tire Inspection
Check the condition of all tires
Are all tires the same size and type as recommended?
Tire Replacement
Select the replacement option
Engine Oil / Oil Filter Cartridge Replacement
Preparation
Park the vehicle on a level surface
Start the engine, warm it up for several minutes, and then turn it off
Access Engine Components
Lift the cargo bed up
Remove the right rear panel
Drain Old Oil
Place an oil pan under the engine to collect the used oil, and then remove the dipstick
Remove the engine oil drain bolt and its gasket to drain the oil from the crankcase
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













