Xylem Pump 33SV11GB3D10

Ensure not to intermix grease bases (lithium, sodium, etc.)

Completely purge old grease if changing grease base

Avoid over greasing to prevent excessive bearing temperatures and failures

Recommended Motor Bearing Lubrication Intervals

Are lubricants operated at elevated temperatures?

Ensure not to intermix grease bases (lithium, sodium, etc.)

Completely purge old grease if changing grease base

Avoid over greasing to prevent excessive bearing temperatures and failures

Check motor operating conditions

Is the motor operating at elevated temperatures?

Increase lubrication frequency if operating at elevated temperatures

Ensure not to intermix grease bases (lithium, sodium, etc.)

Completely purge old grease if changing grease base

Ensure not to over grease to avoid excessive bearing temperatures and failures

Drain the pump through the drain plugs if inactive in freezing conditions

Ensure the drained liquid does not cause damage or injuries

Verify if a suitable antifreeze has been added to the water

Start-Up — Wiring and Grounding

Install, ground, and wire according to local and National Electrical Code requirements.

Install an all leg disconnect switch near pump.

Disconnect and lockout electrical power before installing or servicing pump.

Does the electrical supply match the pump's nameplate specifications?

Use only stranded copper wire to motor and ground.

Enter the wire size to ensure it limits the maximum voltage drop to 10% of the motor nameplate voltage.

Ensure the ground wire is at least as large as the wires to the motor.

Check that wires are color coded for ease of maintenance.