Xylem Pump 15SV4FA1A10

Recommended Motor Bearing Lubrication Intervals

Ensure not to intermix grease bases (lithium, sodium, etc.)

Completely purge old grease if changing grease base

Avoid over greasing to prevent excessive bearing temperatures and failures

Start-Up — Wiring and Grounding

Install, ground, and wire according to local and National Electrical Code requirements.

Install an all leg disconnect switch near pump.

Disconnect and lockout electrical power before installing or servicing pump.

Does the electrical supply match the pump's nameplate specifications?

Use only stranded copper wire to motor and ground.

Enter the wire size to ensure it limits the maximum voltage drop to 10% of the motor nameplate voltage.

Ensure the ground wire is at least as large as the wires to the motor.

Check that wires are color coded for ease of maintenance.

Is the motor operating at elevated temperatures?

Increase lubrication frequency if operating at elevated temperatures

Are you changing the grease base?

Completely purge old grease if changing grease base

Ensure not to intermix grease bases (lithium, sodium, etc.)

Is the grease amount appropriate to avoid over greasing?

Avoid over greasing to prevent excessive bearing temperatures and failures

Refer to driver and coupling manufacturers

Store in a covered dry location

Check motor operating conditions

Is the motor operating at elevated temperatures?

Ensure not to intermix grease bases (lithium, sodium, etc.)

Completely purge old grease if changing grease base

Avoid over greasing to prevent excessive bearing temperatures and failures