Xylem Pump 5SV4FA1A10

MOTOR LUBRICATION — Recommended Motor Bearing Lubrication Intervals

Increase lubrication frequency if operating at elevated temperatures

Ensure not to intermix grease bases

Purge old grease completely if changing grease base

Avoid over greasing to prevent excessive bearing temperatures

Remove the motor following steps 1 through 4 in the MECHANICAL SEAL REPLACEMENT section

For motor frames 213TC and larger, remove components

Install the motor adapter flange onto the new motor

Torque the 4 hex cap screws to the specified values in the ENGINEERING DATA section

Complete the reassembly following steps 17 through 22 in the MECHANICAL SEAL REPLACEMENT section

Note any additional unit service or maintenance performed at a qualified service location

Contact details for local dealer or Goulds Water Technology distributor for assistance

Recommended Motor Bearing Lubrication Intervals

Ensure not to intermix grease bases (lithium, sodium, etc.)

Completely purge old grease if changing grease base

Avoid over greasing to prevent excessive bearing temperatures and failures

Check motor operating conditions

Is the motor operating at elevated temperatures?

Ensure not to intermix grease bases (lithium, sodium, etc.)

Completely purge old grease if changing grease base

Avoid over greasing to prevent excessive bearing temperatures and failures

Ensure the pump is not inactive in freezing conditions

Drain the pump through the drain plugs if necessary

Has suitable antifreeze been added to the water?

Describe any precautions taken to prevent damage or injuries from drained liquid