Xylem Pump 10SV4GA1A10

Refer to driver and coupling manufacturers

Store in a covered dry location

Check motor operating conditions

Is the motor operating at elevated temperatures?

Increase lubrication frequency if operating at elevated temperatures

Ensure not to intermix grease bases (lithium, sodium, etc.)

Completely purge old grease if changing grease base

Avoid over greasing to prevent excessive bearing temperatures and failures

Remove motor components for frames 213TC and larger

Install motor adapter flange onto the new motor

Torque the 4 hex cap screws to specified values

Complete reassembly following steps

Note any additional service or maintenance required

Contact local dealer or distributor for assistance if needed

Recommended Motor Bearing Lubrication Intervals

Ensure not to intermix grease bases (lithium, sodium, etc.)

Completely purge old grease if changing grease base

Check for signs of over greasing

MOTOR LUBRICATION — Recommended Motor Bearing Lubrication Intervals

Determine if lubricants are operated at elevated temperatures

Ensure not to intermix grease bases

Purge old grease completely if changing grease base

Avoid over greasing to prevent excessive bearing temperatures