True Food Service Equipment Freezer TSD-69

WARNING: Disconnect power to cabinet before replacing light bulbs.

IDL (Integrated Door Lighting) Replacement

Squeeze the plastic lampshield together and pull away from the door

Push the bulb down while pulling the spring activated lampholder up to remove the bulb

Disconnect the electrical power to the unit

Clean the finned condenser coil

Vacuum or brush the dirt, lint, or debris from the finned condenser coil

Blow out the condenser with compressed air if there is significant dirt build-up

Reconnect the electrical power to the unit

Contact TRUE Manufacturing Service Department if you have any questions

CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel surfaces.

Identify potential threats to stainless steel surfaces

Preventing Rust on Stainless Steel

Use non-abrasive cleaning tools like soft cloths and plastic scouring pads.

Clean along the polish lines using a plastic scouring pad or soft cloth.

Use alkaline, alkaline chlorinated or non-chloride containing cleaners.

Soften hard water to reduce deposits and consult a treatment specialist if necessary.

Maintain cleanliness of food equipment using recommended cleaners.

Ensure all required tools are available

Select the model type for grill removal instructions

Refer to Image 1 for Slide Door Models and Image 2 for Swing Door Models

Remove bolts anchoring compressor assembly to frame rails