

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Toyota Forklift 7FDA50
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
40 Hourly / 1 Weekly Forklift (Torque Converter Models) Lubrication
Warning: This procedure requires trained personnel with PPE!
Rear axle beam rear pin: inspect and service, lubricate with Molybdenum disulfide grease
Tie rod end pin: inspect and service, lubricate with MP grease
Rear axle cylinder end pin: inspect and service, lubricate with MP grease
Steering knuckle king pin: inspect and service, lubricate with MP grease
Rear axle beam front pin: inspect and service, lubricate with Molybdenum disulfide grease
Swing lock cylinder lower pin: inspect and service, lubricate with Molybdenum disulfide grease
Chain: inspect and service, lubricate with Engine oil
Mast support bushing: inspect and service, lubricate with Molybdenum disulfide grease
40 Hourly / 1 Weekly Fan Belt and V Belt Inspection
Warning: This inspection requires trained personnel with PPE!
Fan belt inspected for cracks and fraying
V belt inspected for cracks and fraying
Enter the tension of the fan belt
Enter the tension of the V belt
Any abnormalities found?
If any abnormalities are found, report to a Toyota dealer for replacement or adjustment
Sign off on the fan belt and V belt inspection
250 Hourly / 6 Weekly Forklift (Torque Converter Models) Lubrication
Warning: This lubrication procedure requires trained personnel with PPE!
Engine crank case
Engine crank case inspection
Engine oil used for lubrication
Tilt cylinder front pin
Tilt cylinder front pin inspection
MP grease used for lubrication
Differential gear
Differential gear inspection
40 Hourly / 1 Weekly Forklift (Clutch Models) Lubrication
Warning: This procedure requires trained personnel with PPE!
Rear axle beam rear pin: inspect and service, lubricate with Molybdenum disulfide grease
Tie rod end pin: inspect and service, lubricate with MP grease
Rear axle cylinder end pin: inspect and service, lubricate with MP grease
Steering knuckle king pin: inspect and service, lubricate with MP grease
Rear axle beam front pin: inspect and service, lubricate with Molybdenum disulfide grease
Swing lock cylinder lower pin: inspect and service, lubricate with Molybdenum disulfide grease
Chain: inspect and service, lubricate with Engine oil
Mast support bushing: inspect and service, lubricate with Molybdenum disulfide grease
3 Monthly Forklift Inspection
Caution: Never perform LPG gas leak checks near fire. Make certain that there is no source of fire in the area throughout the gas leak check.
Warning: To avoid serious injury from fire or explosion, you must follow these rules
- Switch ignition and lights off.
- Check for leaks only in well ventilated, approved areas.
- No smoking, fire or flames allowed.
- Brush soapy water on all joints, bubbles will show leaks.
- Never use any other liquids, or any open flame for leak checks.
- Do not try to start engine until all gas smell is gone.
- If any gas leakage is found, immediately report it to the supervisor for repair by a qualified mechanic or your Toyota dealer. The truck is not allowed to be operated.
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













