Mac-Lander Flatbed Trailer 18TFSWS

Initial tightening to 15-20 lbs using cross tightening sequence

Final tightening to 80-90 ft. lbs for 1/2 studs

Retorque after first 50 miles of use

Check and record tire pressure for each tire

Inspect tires for wear and damage

Measure and record torque levels of wheel lug nuts

Verify lug nuts are secure and not damaged

Is the trailer blocked and secured before changing a tire?

Is the jack capacity appropriate for the trailer weight?

Are all trailer lights operational?

Check operation of the following lights

Inspect condition of reflector lenses

Replace damaged or inoperative bulbs

Refer to tire pamphlet in the operator's manual for complete information on tire safety

Measure the tire pressure for each tire

Is the tire pressure within the recommended range for all tires?

Check each tire for signs of wear and damage

Are all tires free from wear and damage?

Describe any issues found during the inspection

Initial tightening to 15-20 lbs using cross tightening sequence

Final tightening to 80-90 ft. lbs for 1/2 studs

Retorque after first 50 miles of use