Mac-Lander Flatbed Trailer 14TSLWB

Wear protective gloves and eyewear

Ensure the area is well-ventilated

Check the break-away system wiring and connections

Is there any sign of corrosion on the battery terminals?

Is the battery charge level adequate?

Charge the battery if necessary

Initial tightening to 15-20 lbs using cross tightening sequence

Final tightening to 80-90 ft. lbs for 1/2 studs

Retorque after first 50 miles of use

Are the brakes working properly?

Is the load properly secured and not overloaded?

Check electrical connections and visibility

Secure ramps in the appropriate storage area

Is the jack raised to the highest position?

Check that all tires are properly inflated

Inspect tires for wear and damage

Refer to tire pamphlet for complete information on tire safety

Is further action required based on the inspection?

Initial tightening to 15-20 lbs using cross tightening sequence

Final tightening to 80-90 ft. lbs for 1/2 studs

Retorque after first 50 miles of use