Hytrol Conveyor RB-AMZ

A) Maintenance, such as lubrication and adjustments, shall be performed only by qualified and trained personnel.

B) It is Important that a maintenance program be established to insure that all conveyor components are maintained in a condition which does not constitute a hazard to personnel.

C) When a conveyor is stopped for maintenance purposes, starting devices or powered accessories shall be locked or tagged out in accordance with a formalized procedure designed to protect all person or groups involved with the conveyor against an unexpected start.

D) Replace all safety devices and guards before starting equipment for normal operation.

E) Whenever practical, DO NOT lubricate conveyors while they are in motion.; Only trained personnel who are aware of the hazard of the conveyor in motion shall be allowed to lubricate.

Warning: Maintenance should be performed only by qualified and trained personnel.

Check mounting bolts of pulleys' and rollers' bearings

Drive Chain Alignment and Tension

- Check pulleys' and rollers' bearing for noise

Warning: Maintenance should be performed only by qualified and trained personnel.

Safety Precautions: Lock or tag out starting devices or powered accessories when conveyor is stopped for maintenance.

Safety Precautions: Replace all safety devices and guards before starting equipment for normal operation.

Safety Precautions: DO NOT lubricate conveyors while they are in motion.

Safety Precautions: Maintain all guards and safety devices IN POSITION and IN SAFE REPAIR.

Safety Precautions: Maintain all warning signs in a legible condition and obey all warnings.

Safety Precautions: Warn all personnel in the area of the conveyor that the conveyor is about to be started.

Drive chain pre-lubricated from the manufacturer?

Enter the hours of operation since last lubrication

Check for foreign objects inside conveyor before start-up

Check motors, reducers, and moving parts after conveyor is operating

Maintenance should be performed only by qualified and trained personnel

Establish a maintenance program to ensure all conveyor components are safe

When conveyor is stopped for maintenance, starting devices or powered accessories should be locked or tagged out

Replace all safety devices and guards before starting equipment for normal operation

DO NOT lubricate conveyors while they are in motion

CAUTION! Warn all personnel in the area of the conveyor before starting