Advantage Temperature Controller SRG-1620

Consult with Advantage Service Department

Typical Conversions for Motors and Heaters

Items requiring replacement or rewiring

Field Voltage Changeover Procedure

Disengage operations and verify system pressure

Gain access to the electrical panel

Rewire the heater to the new voltage

Remove front panel and open electrical cabinet

Disengage process operations and relieve all system pressure.

Disengage main power supply and verify the Power light on the display is 'off'.

Remove the lift-off access panel and set aside.

Remove the necessary panels to gain access to the pump motor.

Drain machine by removing the pump casing drain plug.

Remove the three motor wire leads from the motor wiring terminals and map the wire terminal locations.

Disengage operations and ensure all system pressure is relieved and the unit’s pressure gauges read '0'.

Disengage main power supply and verify the Power light on the display is 'off'.

Remove the lift-off access panel and set aside.

Drain machine by removing the pump casing drain plug.

Remove heater’s junction box cover to locate wiring connections.

Note the wiring connections for correct reinstallation.

Shake out the water from the connection

Did the yellow Alert icon disappear?

Stop process operations as described in section 3.4 of the manual

Ensure all process pressure is relieved and pressure gauges read '0' pressure

Drain the unit by removing the pump casing drain plug

Unbox the unit before accepting delivery

Document any evident damage on the delivery receipt

Did you refuse the shipment due to damage?

Take photographs of any suspected damage