Wolf Gas Range GR606CG

Ensure the burner is turned off and cool before cleaning.

Gather necessary cleaning materials

Remove the burner grates from the stove.

Clean grates with hot water and liquid detergent using a plastic pad or sponge.

Apply a paste of baking soda and water to any stubborn stains.

Use mild abrasive cleaners sparingly if necessary.

Use a metal spatula to scrape grease into the grease collection tray.

Wipe the surface with a paper towel to remove excess grease or oil after it has cooled.

Grease Collection Tray Maintenance

Clean the grease collection tray after each use to prevent fire hazards.

Remove the drip tray by gently pulling it towards yourself.

Clean the drip tray with soapy water and a clean cloth.

Ensure the grate is cool before handling

Lift off the grate and set it in the sink

Pour very hot water over the cooked-on residue

Cover with wet dish towels and pour more hot water over it

Allow time for the hot, moist conditions to loosen the residue

Remove remaining soil with a soap-filled scouring pad

Ensure all gas valves are turned off

Prepare liquid detergent solution

Apply detergent solution to all gas connections using a brush

Did bubbles appear around any connections?

If bubbles appear, shut off the gas valve and adjust connections

Reapply detergent solution and check connections again

Ensure the burner cap is cool before cleaning

Remove the burner cap from the cooktop and place it on a flat surface near the sink

Wash the burner cap in warm water with liquid detergent or mild abrasive cleaners

Check for and remove any food residues that may cause pitting or crazing

Ensure no food residues remain on the burner cap

Dry the burner cap thoroughly before reinstallation