
Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Wolf Gas Range GR364C
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Burner Pan Cleaning
Initial Cleaning
Wipe with warm water and mild detergent
Rinse and dry immediately
Degreasing
Spray degreaser on a cloth and wipe surface
Buff dry immediately to avoid streaking
Applying Protective Polish
Apply protective polish in the same direction
Handling Hard Water Stains
Burner Cap Cleaning
Preparation
Ensure the burner cap is cool before cleaning
Remove the burner cap from the cooktop and place it on a flat surface near the sink
Cleaning Process
Wash the burner cap in warm water with liquid detergent or mild abrasive cleaners
Check for and remove any food residues that may pit or craze the surface
Post-Cleaning
Ensure no food residues remain on the burner cap
Dry the burner cap thoroughly before reinstallation
Griddle Cleaning
Scraping and Wiping
Use a metal spatula and scrape grease into the grease collection tray.
When the surface has cooled, wipe it with a paper towel to remove excess grease or oil.
Grease Collection Tray Maintenance
Clean grease collection tray after each use.
Ensure grease does not accumulate in the tray to prevent fire hazards.
Drip Tray Cleaning
Remove the drip tray by gently pulling it towards yourself.
Clean drip tray with soapy water and a clean cloth.
Grate Cleaning
Preparation
Ensure the grate is cool before handling
Lift off the grate and set it in the sink
Residue Loosening
Pour very hot water over the cooked-on residue
Cover with wet dish towels
Pour more hot water over the towels
Allow time for the hot, moist conditions to loosen the residue
Cleaning and Finishing
Burner Grates Cleaning
Preparation
Gather cleaning materials
Cleaning Process
Mix hot water and liquid detergent
Apply the mixture to the grates using a plastic pad or sponge
Create a paste of baking soda and water
Apply the baking soda paste to stubborn stains
Use mild abrasive cleaners sparingly on tough spots
Post-Cleaning
Access the parts list for your equipment in MaintainX.
Burner Valve, 15K, Nat
808016
Orifice, Simmer, .62 mm, Marking 62
804128
Orifice, Main, .67 mm, Marking 67
809495
Burner Valve, 15K, LP
808017
Orifice, Simmer / Main, .43 mm, Marking 43
804993
Burner Valve, 15K, Nat
808016
Orifice, Simmer, .62 mm, Marking 62
804128
Orifice, Main, .67 mm, Marking 67
809495
Burner Valve, 15K, LP
808017
Orifice, Simmer / Main, .43 mm, Marking 43
804993
Burner Valve, 15K, Nat
808016
Orifice, Simmer, .62 mm, Marking 62
804128
Orifice, Main, .67 mm, Marking 67
809495
Burner Valve, 15K, LP
808017
Orifice, Simmer / Main, .43 mm, Marking 43
804993
MaintainX Assist is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













