Toyota Forklift 7FD40

Warning: Use only genuine Toyota parts for replacement parts, and use the recommended types of lubricants.

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.

Old Swing lock cylinder removed

Upload a photo of the removed cylinder

New Swing lock cylinder installed

Upload a photo of the installed cylinder

Sign off on the cylinder replacement

1. Gear shift link: inspect and service, lubricate with MP grease

2. Oil pump spline shaft: inspect and service, lubricate with Molybdenum disulfide grease

3. Oil tank: lubricant replacement, lubricate with hydraulic oil

4. Gear shift lever: inspect and service, lubricate with Molybdenum disulfide grease

5. Tilt steering locking mechanism: inspect and service, lubricate with MP grease

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.;

Warning: Only trained personnel should perform this procedure

Did you use only genuine Toyota parts for replacement parts?

Did you use the recommended types of lubricants?

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.

Sign off on the forklift components replacement

1. Injection timing: Measure and correct and adjust as required.

2. Draining of sedimenter: Inspect and correct and replace as required.

1. Oil clutch function and oil leakage: Inspect and correct and replace as required.

- Torque converter and transmission:

1. Stall test and oil pressure measurement: Measure and correct and adjust as required.

1. Tank and oil strainer: Clean

Torque converter case: lubricant replacement

Oil tank: lubricant replacement

Tilt steering locking mechanism: inspect and service

Oil pump spline shaft: inspect and service

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.

Sign off on the forklift lubrication