Toyota Forklift 7FD45

Warning: Use only genuine Toyota parts for replacement parts, and use the recommended types of lubricants.

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.

Upload a photo of the replaced part

1. Gear shift link: inspect and service, lubricate with MP grease

2. Oil pump spline shaft: inspect and service, lubricate with Molybdenum disulfide grease

3. Oil tank: lubricant replacement, lubricate with hydraulic oil

4. Gear shift lever: inspect and service, lubricate with Molybdenum disulfide grease

5. Tilt steering locking mechanism: inspect and service, lubricate with MP grease

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.;

Warning: Only trained personnel should perform this procedure

Were only genuine Toyota parts used for replacement?

Were the recommended types of lubricants used?

Note: In case of hard operating conditions, a service interval of 170 hours or 1 month may be recommendable.

Sign off on the forklift components replacement

1. Injection timing: Measure and correct and adjust as required.

2. Draining of sedimenter: Inspect and correct and replace as required.

1. Oil clutch function and oil leakage: Inspect and correct and replace as required.

- Torque converter and transmission:

1. Stall test and oil pressure measurement: Measure and correct and adjust as required.

1. Tank and oil strainer: Clean

1. Torque converter case: lubricant replacement, lubricate with Automatic transmission fluid

2. Oil tank: lubricant replacement, lubricate with Hydraulic oil

3. Tilt steering locking mechanism: inspect and service, lubricate with MP grease

4. Oil pump spline shaft: inspect and service, lubricate with Molybdenum disulfide grease

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.;