Tennant Cleaning Equipment T7

Ensure the machine is on a level surface

Remove the key from the machine

Check the front tire for damage and wear

Check the rear left tire for damage and wear

Check the rear right tire for damage and wear

Check motor brushes for the following components

Describe any issues found with the motor brushes

Are all motor brushes in good condition?

Schedule next motor brush check in 100 hours

Ensure machine is on a level surface

Vacuum Fan and Tank Seals Inspection

Check vacuum fan for damage and wear

Inspect tank seals for damage and wear

Cylindrical Brush Drive Belts Inspection

Check tension of cylindrical brush drive belts

Stop machine on a level surface and ensure the scrub head is raised

Turn the machine ON/OFF key switch off

Safety precautions before servicing

Pull the pin from the side squeegee retainer pivot

Open the side squeegee retainer pivot toward the front of the machine

Pull the side squeegee toward the rear of the machine to access the scrub brushes or pads

Remove the pad driver from the machine

Squeeze the spring clip together to remove the center disk

Flip or replace the scrub pad, center the scrub pad on the pad driver

Reinstall the center disk to secure the pad in place on the pad driver

Reinsert the pad driver into the machine