Skyjack Vertical Mast Lift SJ20 E

Maintenance Support(s) correctly attached & no damage

Scissor Assembly & Bumpers correctly attached, no deformation/damage

Cables & wires installed with no damage

Sliders & Rollers correctly attached & no obstructions, dirt, or damage/wear

Lift Cylinder(s) have no damage or missing components, tight fittings and hoses & no leaks, correctly installed

Angle Transducer correctly attached & no damage

Scissor Pins correctly attached & no damage

Mast Assembly has no damage, cracks, or deformation

Mast Assembly lubricated as recommended

Railings and Gate: Correctly attached & no damage or missing components

Fall-Protection Anchorage: Attachment rings correctly attached & no damage

AC Power Socket: No obstructions, dirt, or damage

Platform Control Console: Operate the switches and make sure they all operate correctly. No damage or missing components

Upload a photo of the Platform Control Console

Manual Storage Box: Manuals and documents are in the storage box, in good condition, and you can read them

Powered Extension Control Console: Operate switches and make sure they all operate correctly. No damage or missing components

Upload a photo of the Powered Extension Control Console

Extension Platform: Correctly attached & no damage or missing components

Engine and Components: Replace the engine oil and filter

Engine Intake Air Filter: Replace the air filter if necessary

Radiator: Do a check of coolant level & condition & replace if necessary

Wheel/Tire Assembly: Wheel nuts torqued as recommended

Axles: Do a check and replace oil if necessary

Hydraulic Oil: Do a check and replace oil and filters if necessary

Sign off on the 1 Yearly Base/Engine Maintenance

Service Bulletins - No open service bulletins

Annual Inspection - Completed within 13 months

Labels - In place, correctly attached & readable

Limit Switches - Correctly installed & no obstructions or damage

Manifolds - Tight fittings and hoses & no damage or leaks. Tight wire connections, no missing components & correctly working valves

Main Power Disconnect Switch - Cables tight & in working order

Base Controls - Operate switches and make sure they all operate correctly. No damage or missing components

Brakes - Correctly attached & no damage or leaks

Brakes - Check on disc wear and replace if necessary