Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Mitsubishi Split-Type, Heat Pump Air Conditioner PUY-A24NHA2
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Compressor Disassemble
Upload a photo of the service panel before removal
Service panel removed
Upload a photo of the top panel before removal
Top panel removed
Upload a photo of the front cover panel before removal
Front cover panel removed
Upload a photo of the back cover panel before removal
Back cover panel removed
Upload a photo of the electrical parts box before removal
Reactor A24 Disassemble
Remove the service panel
Upload a photo of the removed service panel
Remove the top panel
Upload a photo of the removed top panel
Remove the electrical parts box
Upload a photo of the removed electrical parts box
Remove 3 reactor fixing screws (4 ✕ 16) and remove the reactor
Upload a photo of the removed reactor
Sign off on the reactor disassembly
4-Way Valve Coil,Linear Expansion Valve Coil and Bypass Valve Coil Disassemble
(1) Remove the service panel. (See figure 1.)
(2) Remove the top panel. (See figure 1.)
(3) Remove the electrical parts box. (See photo 3.)
[Removing the 4-way valve coil]
(4) Remove 4-way valve coil fixing screw (M4 ✕ 6).
(5) Remove the 4-way valve coil by sliding the coil toward you.
(6) Disconnect the connector 21S4 (green) on the controllern board in the electrical parts box.
[Removing the linear expansion valve coil]
(4) Remove the linear expansion valve coil by sliding the coil upward.
Outdoor Unit Refrigirant Charging
Cautions for service
Refrigerant recovered from the unit completely
Refrigerant released in the air
Cycle charged with specified amount of refrigerant after service
Filter drier installed during service
Additional refrigerant charge
Cylinder for R410A is a syphon type
Charging performed with the cylinder of syphon stood vertically
Service tools
TH7 Thermistor Disassemble
Warning: This procedure requires trained personnel with PPE!
Upload a photo of the service panel before removal
Service panel removed successfully
Upload a photo of the top panel before removal
Top panel removed successfully
Upload a photo of the connector TH7 on the controller circuit board before disconnection
Connector TH7 disconnected successfully
Upload a photo of the clamp for the lead wire before loosening
Clamp for the lead wire loosened successfully
Access the parts list for your equipment in MaintainX.
Inverter Starter Type,Hermetic Compressor - 1,3 KW
TNB220FLDM
Inverter Starter Type,Hermetic Compressor - 1,3 KW
TNB220FLDM
Inverter Starter Type,Hermetic Compressor - 1,3 KW
TNB220FLDM
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













