McElroy Manufacturing Fusion Machine 618

Read the engine maintenance instructions

Ensure the engine is cool before starting the procedure

Locate the oil drain plug on the bottom of the oil pan

Place an oil pan under the drain plug

Remove the oil drain plug and allow the oil to completely drain out

Unlatch the two latches on both sides of the rear cowl

Slide the rear cowl to rear using both hands

Slide the front cowl off to the front

Remove the bottom cowl by sliding it forward then up

Check the hydraulic fluid level in the reservoir

Is the hydraulic fluid visible in the reservoir strainer?

Fill the reservoir until fluid is visible in the strainer

Ensure no dirt, water, or foreign matter enters the tank

Refer to the 'Hydraulic Fluids' section of the manual for fluid recommendations

Refer to the 'Hydraulic Fluids' section of the manual for fluid recommendations

Place the drain tube into a container

Read the engine maintenance instructions

Ensure the appropriate oil for the ambient temperature is available

Locate the oil drain plug on the bottom of the oil pan

Replace the oil filter if due (every 200 hours)

Check oil level using the dipstick