McElroy Manufacturing Fusion Machine 1236

Inspect blades for the following issues

Are there any dull or chipped blades?

Replace any dull or chipped blades

Ensure blade does not extend beyond the inner or outer circumference of the facer

Remove the cowling to gain access to the hydraulic pump

Start the engine and select high speed

Enter the current system pressure reading

Is the system pressure at the correct level for the selected unit?

Read the engine maintenance instructions

Ensure the engine is cool before starting the procedure

Locate the oil drain plug on the bottom of the oil pan

Place an oil pan under the drain plug

Remove the oil drain plug and allow the oil to completely drain out

Turn knob to desired temperature

Measure the heater surface temperature with a pyrometer

Is the pyrometer reading within acceptable variance?

Turn knob to match pyrometer reading

Read the engine maintenance instructions

Ensure the engine is cool before starting the procedure

Locate the oil filter behind the rear cowling

Locate the dipstick on the opposite side of the engine

Locate the oil drain plug on the bottom of the oil pan

Locate the oil filler cap on top of the engine