Mazak CNC Vertical Machining Center AJV-25/405

Ensure all electrical enclosure doors are closed unless necessary for maintenance.

Avoid using compressed air for cleaning the machine or other elements.

Use only the specified lubricant recommended by YAMAZAKI MAZAK.

Carry out weekly and monthly maintenance.

Clean the NC equipment, electrical control unit, and machine.

Ensure electrical enclosures are closed unless necessary maintenance is being performed.

Avoid using compressed air for cleaning the machine.

Use only the specified lubricant recommended by YAMAZAKI MAZAK.

Remove chips, dust, and other foreign matter from the following areas

Wipe off lubricant, coolant, and chips from the machine surface.

Clean the slide way and the slide way covers.

Clean the exposed limit switches and around them.

Ensure electrical enclosure doors are closed unless necessary maintenance requires them open.

Avoid using compressed air for cleaning to prevent dust intrusion.

Use only the specified lubricant recommended by YAMAZAKI MAZAK.

Clean the inside of the electrical control cabinet and other control panels.

Replace fan filters of the heat exchanger if considerably dirty.

Check table and base level, and lock nuts for tightness.

Ensure electrical enclosures are closed unless necessary maintenance requires them to be open.

Avoid using compressed air for cleaning the machine.

Use only the specified lubricant recommended by YAMAZAKI MAZAK.

Check the hydraulic power unit oil level.