Epson Inkjet Printer SureColor P6570E

Ensure no paper is loaded in the printer

Touch a metal object to discharge static electricity

Review the following cautions before proceeding

On the LCD screen, select Maintenance > Cleaning the Maintenance Parts > Wiping the Print Head > Start

Use a cleaning stick to wipe around the print head to remove any ink, lint, or dirt

Turn off the product, wait for the LCD screen to turn off, and unplug the power cable from the electrical outlet.

Wait for one minute before continuing.

Use a soft, lint-free cloth to thoroughly remove dust and dirt from the platen. Wipe from the top to the bottom of the platen and do not touch the rollers or ink tubes.

For stubborn dirt, dampen a soft cloth with neutral detergent, wring it out, and clean the platen. Dry the platen with a soft, dry, lint-free cloth when finished.

Cleaning the Borderless Pad Edges

Use a pointed object such as a toothpick to push any accumulated paper particles into the holes.

Load roll paper or cut sheet paper in the printer

Ensure the correct paper type is selected

Select Paper Feed Adjustment Mode

Select Manual Adjustment Setting

Select Start to print an adjustment pattern

Did you select 'Quality First'?

Check the LCD screen to determine which maintenance box needs to be replaced.

Remove the new borderless maintenance box from the package.

Lift up the paper support lock lever, then move the paper support down to position A (the lowest position).

Extend the paper output flap as shown.

With the paper output flap extended, lift up the paper support lock lever, then move the paper support up to position C (the highest position).

Pull out the borderless maintenance box carefully without tilting it.

Remove all paper from the printer

Select Maintenance > Replace Auto cutter blade > Start

Use a Phillips-head screwdriver to loosen the screw holding the cutter in place and carefully remove the cutter

Install the new cutter in the product with the protective material still attached