Huntleigh Healthcare Pocket Doppler FD1

Wipe any fluids from the surface of the product using a clean dry cloth

Wipe with a cloth dampened in 70% Isopropyl Alcohol

Completely dry with a clean, dry lint free cloth

If the product has been contaminated, use the methods described for patient applied parts

Check that all external surfaces are clean and free of dirt and fluids

Check with facility’s local infection control policy and medical equipment cleaning procedures.

Observe warnings and guidance on cleaning fluid labelling regarding use and PPE

Ensure detergent or disinfectant wipes are used with excess solution squeezed out.

Wipe off disinfectant using a cloth dampened with clean water.

Inspect the probe tip for cracks or damage.

Check the cable and connector for any cracking or intermittent behaviour.

Wipe with a mild neutral detergent

Wipe with a cloth dampened in water

Completely dry with a clean lint free cloth

Follow Low Risk Cleaning Procedure

Wipe with a cloth dampened in Sodium Hypochlorite (1,000ppm)