Goodman Gas Furnace GMES960603BNAA

Disconnect all power before servicing or installing the unit

Check the following furnace components for proper working order

Was the ignitor handled with care?

Describe any issues encountered with the ignitor

Were all necessary repairs or services performed?

Ensure the air cleaner is installed in the correct position (not with the access door facing down).

Verify the air cleaner is located in the return air duct next to the blower compartment.

Electronic Air Cleaner Inspection

Check accessibility for periodic inspection and cleaning of pre-filters and electronic cells.

Inspect and clean the pre-filters.

Inspect and clean the electronic cells.

Check accessibility for periodic inspection and replacement of the Media Air Cleaner filter cartridge.

Ensure all other gas appliances are turned off

Ensure the heating cycle has been in operation for at least fifteen minutes

Record the time in seconds for one complete revolution of the cubic foot dial on the gas meter

Enter the number of cubic feet of gas consumed per hour from the gas rate chart

Enter the calorific value of the gas (BTU per cubic foot)

Calculate the BTU input by multiplying the cubic feet of gas consumed per hour by the calorific value

Turn the furnace on at the thermostat

Wait a few minutes for dust to settle

Check that the flames are stable, quiet, soft and blue with slightly orange tips

Verify flames extend directly outward from the burner ports without curling downward, floating or lifting off the ports

Disconnect all power sources before servicing

Verify power is disconnected from all sources

Clean the permanent filter if applicable

Replace the disposable filter if applicable

Was the filter replaced with the same type and size?