Donaldson Shaker Dust Collector VS-1200

Transfer dust from the dust container to a suitable disposal site and dispose of dust in accordance with local requirements for the materials being collected.

Is the dust container 2/3 full?

Is the gasket under the container cover intact?

If an optional slide gate is used, close the gate before servicing the container.

WARNING: Sharp edge of slide gate may result in personal injury while closing the slide gate. Keep hands clear when operating the slide gate.

Is the dust container replaced and reclamped to the collector?

NOTICE: To avoid possible damage to the fan motor, maintain a seal below the collector if servicing the dust storage device while the fan is running.

Is the collector returned to service?

Most dusts present safety and health hazards that require precautions. Wear eye, respiratory, head, and other protection equipment suitable for the type of dust.

Use proper safety and protective equipment when removing contaminants and filters.

Dirty filters may be heavier than they appear. Use appropriate lifting methods to avoid personal injury and/or property damage.

Turn all power OFF and lock out all power before performing service or maintenance work.

Do not operate with missing or damaged filters.

1. Turn all power to collector OFF.

Warning: Wear eye, respiratory, head, and other protection equipment suitable for the type of dust when performing any service activities.

LOCK-OUT all energy sources prior to performing any service or maintenance on the equipment.

Electrical service or maintenance work must be performed by a qualified electrician and comply with all applicable national and local codes.

Physical condition of the collector is good

Dust drawers filled (in percentage)

Sign off on the operational check