

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Daikin Split System Air Conditioner FCAG100AVEB
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
25000 Hourly User Interface / Switches Maintenance
Pre-Maintenance Considerations
Ensure the unit has not been started or stopped more than 6 times/hour
Verify the unit operates 10 hours/day and 2,500 hours/year
Replacement of User Interface and Switches
Replace the user interface
Replace the switches
Post-Maintenance Review
Is the unit operational after maintenance?
Describe any issues encountered during maintenance
8 Yearly Crankcase Heater Replacement
Pre-Replacement Considerations
Consider shortening maintenance and replacement cycles if the unit is used in locations where:
Replacement of Crankcase Heater
Replace Crankcase Heater
Post-Replacement Recommendations
Refer to maintenance and inspection contract for more details on component replacement.
Consider recommended intervals for replacement cycles for budgeting maintenance and inspection fees.
Contact dealer for details if needed
Warranty Information
8 Yearly Drain Pan Maintenance
Pre-Maintenance Considerations
Ensure the unit has not been frequently started and stopped more than 6 times/hour
Verify the unit operates approximately 10 hours/day and 2,500 hours/year
Drain Pan Replacement
Replace the drain pan
Post-Maintenance Review
Is the maintenance and inspection contract reviewed for updated cycles?
Notes on any additional maintenance required sooner than recommended intervals
Suction Grille Cleaning
Preparation
Ensure water temperature is below 50°C
Suction Grille Removal
Open the suction grille
Remove the suction grille
Remove the air filter
Cleaning Process
Clean the suction grille with a soft bristle brush and water or neutral detergent
If very dirty, apply kitchen cleaner, leave for 10 minutes, then wash with water
20000 Hourly Expansion Valve Maintenance
Important Notice
Pre-Maintenance Checks
Has the unit been operating under normal conditions without frequent starting and stopping?
Enter the number of hours the unit has been operating per day
Enter the number of hours the unit has been operating per year
Expansion Valve Replacement
Replace the expansion valve
MaintainX Assist is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













