Daikin Outdoor Unit Heat Pump Air Conditioner RXS71FAV1B8

Wait for 10 minutes or more after turning off all power supplies before disassembling work.

Ensure no burns occur from heated pipes and parts.

Ventilate the room if refrigerant gas leaks during work.

Prepare wet cloth to extinguish fire immediately in case refrigerant oil catches fire.

Environmental and Safety Cautions

Ensure refrigerant gas is not discharged into the atmosphere.

Restore piping by non-oxidation brazing.

Warning: Wait for 10 minutes after turning off all power supplies before disassembling work.

Remove the cover of the electrical box by releasing the 4 hooks indicated by W.

Disconnect the connectors from the service monitor PCB.

Detach the 4 clamps with pliers.

Remove the service monitor PCB.

Wait for 10 minutes after turning off all power supplies before starting disassembly

Remove the 2 lower screws first

Ensure the wire harness is facing downward when reassembling

Warning: Wait for 10 minutes after turning off all power supplies before disassembling work.

Remove the screw on the stop valve mounting plate.

Remove the screw on the partition plate (1).

Remove the 2 screws to detach the earth / ground wires.

Disconnect the connector [S70] (fan motor).

Release the fan motor lead wire from the 5 hooks.

Disconnect the connectors of the front side.

Has it been 10 minutes since all power supplies were turned off?

Remove the sound blanket (top upper)

Remove the screw and slightly push the partition plate (1) to the left for easy work

Remove the sound blanket (outer)

Remove the sound blanket (top lower)

Remove the sound blanket (inner)