Daikin Outdoor Unit Cooling Only Air Conditioner RKS71GVMV

Warning: Wait for 10 minutes after turning off all power supplies before disassembling work.

Remove the screw on the stop valve mounting plate.

Remove the screw on the partition plate (1).

Remove the 2 screws to detach the earth / ground wires.

Disconnect the connector [S70] (fan motor).

Release the fan motor lead wire from the 5 hooks.

Disconnect the connectors of the front side: [S20] (electronic expansion valve coil), [S40] (overload protector), [S80] (four way valve coil), [S90] (thermistors).

Has the power supply been turned off for at least 10 minutes?

Remove the sound blanket (top upper)

Remove the screw and slightly push the partition plate (1) to the left for easy work

Remove the sound blanket (outer)

Remove the sound blanket (top lower)

Remove the sound blanket (inner)

Warning: Wait for 10 minutes after turning off all power supplies before disassembling work.

Lift the top panel and remove it.

Warning: Wait for 10 minutes or more after turning off all power supplies before disassembling work.

Remove the 2 lower screws first.

Ensure the wire harness is facing downward when reassembling.

Ensure all power supplies are turned off for at least 10 minutes before starting disassembly.

Pull out the electronic expansion valve coil.

Remove the screw and remove the four way valve coil (if applicable).

Pull out the outdoor heat exchanger thermistor.

Remove the discharge pipe thermistor.