Daikin Dedicated Outdoor Air System WGOV016F1RFBLLB002000S7500

Check for dirt in the water system

Install field sensors and land wires on the terminal block

LOCKOUT/TAGOUT all power sources prior to wiring or servicing the unit

Disconnect electric power before servicing equipment

Check unit configuration settings prior to operating the unit

Open water valves to full-open position and turn on power to the conditioner

Provide field input for the following

Enable trending if an SD card is installed in the main control board

Use default setpoints or change if desired

Ensure R-410A is available for charging

Verify that recycle or recovery equipment is designed for R-410A

Install a valve in the charging line to flash liquid to vapor if necessary

Check filters at 60-day intervals for the first year

Can light be seen through the filter when held up to sunlight or a bright light?

Is filter replacement required based on light visibility?

Replace the filter if necessary

Describe any adjustments to the filter check standards based on project requirements or experience

Gently unscrew the filter from the probe

Rinse the filter under warm water until clean

Use warm soapy water if necessary

Gently replace the filter by screwing it back into the probe

Ensure the filter screws all the way into the probe