Daikin Outdoor Heat Pump RXS50K2V1B

Wait for 10 minutes or more after turning off all power supplies before disassembling work.

Disconnect the connector [S70] for the fan motor.

Release the clamp from the partition plate.

Release the fan motor lead wire from the groove and the 2 hooks of the partition plate.

Remove the nut and remove the outdoor fan.

Remove the 2 screws of the fan motor fixing frame.

Wait for 10 minutes after turning off all power supplies before starting disassembly.

Ensure pipes and parts heated by the gas brazing machine are cool to avoid burns.

Is the room ventilated in case of refrigerant gas leakage?

Prepare wet cloth to extinguish fire in case refrigerant oil catches fire.

Environmental and Safety Cautions

Collect all refrigerant gas to avoid atmospheric discharge.

Restore piping using non-oxidation brazing.

Wait for 10 minutes or more after turning off all power supplies before disassembling work.

Disconnect the PCB connector [S12] and pull out the clamp.

Disconnect the connector [S10].

Pull out the clamp. When reassembling, insert the clamp as below.

Disconnect the connectors [HN3] [HL3].

Pull out the clamp. When reassembling, insert the clamp as below.

Warning: Wait for 10 minutes after turning off all power supplies before disassembling work.

Remove the 2 screws and remove the partition plate.

Remove the sound blanket (top upper).

Remove the sound blanket (top lower).

Remove the sound blanket (back).

Remove the sound blanket (outer).

Remove the sound blanket (inner).

Warning: Wait for 10 minutes or more after turning off all power supplies before disassembling work.

Remove the 4 screws from the top panel

Remove the 4 screws from the discharge grille

Slide the discharge grille upward and remove it

Check for hooks on the discharge grille