Daikin Cooling-Only Outdoor Unit RKS40MVLT

Wait for 10 minutes after turning off all power supplies before starting disassembly

Disconnect the connector [S70] for the fan motor

Release the clamp from the partition plate

Release the fan motor lead wire from the groove and the 2 hooks of the partition plate

Remove the nut and remove the outdoor fan

Remove the 2 screws of the fan motor fixing frame

Ensure all power supplies are turned off for at least 10 minutes before starting disassembly.

Disconnect connectors and pull out clamps

Unfasten the 4 hooks at the bottom

Unfasten the 2 hooks and remove the main PCB

Warning: Wait for 10 minutes after turning off all power supplies before disassembling.

Protection Plate and Wire Fixture Removal

Remove the 2 screws and remove the protection plate.

Remove the 3 screws and remove the wire fixture.

Remove the 7 screws and remove the connecting wire and the power supply wire.

Remove the 2 screws and remove the earth / ground wire.

Pull out the outdoor temperature thermistor.

Remove the 4 screws of the right side panel.

Wait for 10 minutes after turning off all power supplies before starting disassembly.

Ensure pipes and parts heated by the gas brazing machine are cool to avoid burns.

Is the room ventilated in case of refrigerant gas leakage?

Prepare wet cloth to extinguish fire in case refrigerant oil catches fire.

Environmental and Safety Cautions

Collect all refrigerant gas to avoid atmospheric discharge.

Restore piping using non-oxidation brazing.

Warning: Wait for 10 minutes after turning off all power supplies before disassembling work.

Remove the 2 screws and remove the partition plate.

Remove the sound blanket (top upper).

Remove the sound blanket (top lower).

Remove the sound blanket (back).

Remove the sound blanket (outer).

Remove the sound blanket (inner).