Daikin Cooling-Only Outdoor Unit RKS60GVMV

Warning: Wait for 10 minutes after turning off all power supplies before disassembling work.

Remove the 2 screws and remove the protection plate.

Remove the 3 screws and remove the wire fixture.

Remove the 7 screws and remove the connecting wire and the power supply wire.

Remove the 2 screws and remove the earth / ground wire.

Pull out the outdoor temperature thermistor.

Remove the 4 screws of the right side panel.

Unfasten the 3 hooks and remove the right side panel.

Wait for 10 minutes after turning off all power supplies before starting disassembly.

Ensure pipes and parts heated by the gas brazing machine are cool to avoid burns.

Is the room ventilated in case of refrigerant gas leakage?

Prepare a wet cloth to extinguish fire immediately if refrigerant oil catches fire.

Environmental and Safety Cautions

Collect all refrigerant gas to avoid discharging into the atmosphere.

Restore piping using non-oxidation brazing.

Wait for 10 minutes or more after turning off all power supplies before disassembling work.

Ensure pipes and other parts heated by the gas brazing machine are cool to avoid burns.

Is the room ventilated in case of refrigerant gas leakage?

Collect all refrigerant gas to prevent atmospheric discharge.

Restore the piping by non-oxidation brazing.

Wrap the four way valve with wet cloth and provide water to prevent overheating.

Ensure all power supplies are turned off for at least 10 minutes before starting disassembly.

Disconnect connectors and pull out clamps

Unfasten the 4 hooks at the bottom

Unfasten the 2 hooks and remove the main PCB

Warning: Wait for 10 minutes or more after turning off all power supplies before disassembling work.

Remove the 4 screws from the top panel

Remove the 4 screws from the discharge grille

Slide the discharge grille upward and remove it

Check for hooks on the discharge grille