Daikin Cooling-Only Outdoor Unit RKS60F3V1B9

Wait for 10 minutes or more after turning off all power supplies before disassembling work.

Fan Motor and Outdoor Fan Removal

Disconnect the connector [S70] for the fan motor.

Release the clamp from the partition plate.

Release the fan motor lead wire from the groove and the 2 hooks of the partition plate.

Remove the nut and remove the outdoor fan.

Remove the 2 screws of the fan motor fixing frame.

Wait for 10 minutes after turning off all power supplies before starting disassembly.

Ensure pipes and parts heated by the gas brazing machine are cool to avoid burns.

Is the room ventilated in case of refrigerant gas leakage?

Ensure refrigerant gas is not discharged into the atmosphere and is collected properly.

Restore piping using non-oxidation brazing.

Wrap the four way valve with wet cloth and provide water to prevent overheating.

Ensure all power supplies are turned off

Wait for 10 minutes after turning off power supplies

Remove the main PCB [S12] for [HL4] [HN4] on filter

Disconnect the PCB connector [S12] and pull out the clamp

Disconnect the connector [S10] for [S11] on filter PCB

Pull out the clamp and note reassembly instructions

Disconnect the connectors [HN3] [HL3] for [HN2] [HL2] on filter PCB

Warning: Wait for 10 minutes after turning off all power supplies before disassembling work.

Remove the 2 screws and remove the partition plate.

Remove the sound blanket (top upper).

Remove the sound blanket (top lower).

Remove the sound blanket (back).

Remove the sound blanket (outer).

Remove the sound blanket (inner).

Warning: Wait for 10 minutes after turning off all power supplies before disassembling work.

Remove the 2 screws and remove the protection plate.

Remove the 3 screws and remove the wire fixture.

Remove the 7 screws and remove the connecting wire and the power supply wire.

Remove the 2 screws and remove the earth / ground wire.

Pull out the outdoor temperature thermistor.

Remove the 4 screws of the right side panel.

Unfasten the 3 hooks and remove the right side panel.