Cybex Strength Machine 11100

1. Upholstery - Wipe down all upholstery as per the recommendations listed below for light soiling and more difficult stains.

• A solution of 10% household liquid dish soap with warm water applied with a soft damp cloth.

• If necessary, a solution of liquid cleanser and water applied with a soft bristle brush. Wipe away the residue with a water dampened cloth.

• Dampen a soft white cloth with a solution of 10% household bleach (sodium hypochlorite), 90% water. Rub gently. Rinse with a water dampened cloth to remove bleach concentration.

• The same procedure can be used with full strength household bleach, if necessary.

• Allow bleach to puddle on the affected area or apply with a soaked cloth for approximately 30 minutes.

Rinse with a water dampened cloth to remove any remaining bleach concentration.

Check all nuts and bolts for looseness. Tighten as required.

Inspect all belts (entire length) for any non-uniformity and wear.

Immediately replace belt if any of the following conditions are present

Inspect all cables for wear or damage and proper tension. When inspecting cables, run your fingers on the cable, paying particular attention to bends in the cable and attachment points.

Replace all worn cables immediately. The following conditions may indicate a worn cable

Inspect bars and handles for wear, paying particular attention to tab area connecting points.

Inspect snap links for proper latching (indicates wear).

Inspect for loose or worn grips.

Inspect all labeling for readability. This includes instructional placards, warning and caution decals.