BRYANT Air Conditioner 189BNV

Inspect cabinet for damage. Replace components that are damaged or severely rusted.

Inspect electrical disconnect for proper function. Repair or replace as necessary.

Inspect electrical wiring and connections. Tighten loose connections. Inspect and perform functional test of equipment as needed to ensure proper function. Repair or replace damaged or overheated components and wiring.

Check refrigerant system subcooling and/or superheat (system dependent).

Inspect inside of unit. Clean if debris is present.

Inspect condenser coil. Clean if dust, dirt, or debris is present. Rinse unit with fresh water. Do not use harsh chemicals or high pressure water on coils. More frequent rinsing is required for units near a sea coast.

Inspect motor and fan for damage. Make sure fan spins freely.

2) Indoor specific: (for fossil fuel furnaces and accessories, refer to unit specific literature)

Clear away debris and vegetation near unit.

2) Indoor specific: (for fossil fuel furnaces and accessories, refer to unit specific literature)

Inspect, clean, or replace air filter if dirty.

Simple, routine maintenance as described below will enhance your air conditioner system’s ability to operate economically and dependably.

Always remember the following safety precautions:

Failure to follow this warning could result in personal injury.

Although special care has been taken to minimize sharp edges in the construction of your unit, be extremely careful and wear appropriate protective clothing and gloves when handling parts or reaching into the unit.