

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Bobcat Side Discharge Mower 942290
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Parking Brake Adjustment
NOTE: There are 2 brakes, 1 on each transaxle.
The parking brake should keep the machine from moving. To check the parking brake, park the machine on a level surface, open the bypass valves and set the parking brake to ON. Attempt to move the machine forward and backward by pushing it.
If the machine moves, adjust the parking brake linkage as follows:
Move the machine to a flat horizontal surface.
Grip the flats on the brake rod A. Tighten nut B on the brake rod until you run out of threads.
Upload a photo of the brake rod A and nut B.
Move the parking brake handle to the OFF position.
Loosen nut X.
Hold brake arm in the OFF position as shown in Figure 2.
25 Hourly Air Precleaner Element Cleaning
Engines equipped with dual element air cleaners have a paper air cleaner element with an oiled, foam precleaner element on the dirty side of the paper element. Both should be inspected regularly and maintained.
Clean and re-oil precleaner element every 25 hours (more often under dusty conditions).
Disassemble air cleaner cover.
Remove precleaner.
Wash precleaner in kerosene or liquid detergent and water.
Wrap precleaner in cloth and squeeze to remove cleaner.
Saturate precleaner in engine oil. Squeeze to remove excess oil.
Re-install precleaner. Reassemble air cleaner components and screw assembly down tight.
Sign off on the precleaner element cleaning
Blade Maintenance
Inspect blades before sharpening
Replace bent or cracked blades
Replace blades when the lift portion has worn thin
Maintain cut angle at 30o
Do not overheat blades when sharpening
Blade manufacturer
Warning: Use of another manufacturer’s blades may be dangerous
Sign off on the blade maintenance
Cut Adjustment
Warning: Ensure the machine is turned off before starting the procedure
Deck lifted to the highest position
Pin B moved to the selected hole
Deck lowered until the lift lever is stopped by the pin
Note: Height of cut may vary due to the amount of tread on the tires, tire diameter or inflation pressure.
Sign off on the cut adjustment
100 Hourly Air Cleaner Paper Cartridge Check
Warning: Do not wash the cartridge or use compressed air which can cause damage.
Enter the hours on the machine's hour meter
Is the cartridge clean after tapping gently?
Is the cartridge dirty, bent or damaged?
Action taken
Sign off on the cartridge check
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













