BINDER Climate Chamber MK115-400V-C

Pre-Decontamination Safety Measures

Ensure proper decontamination is performed if contamination by hazardous substances has occurred.

Disconnect the chamber from the power supply.

Select appropriate disinfectants for use

Is there any doubt regarding the suitability of cleaning products?

Use adequate personal safety controls.

Check the color of the status display on the rear panel

If yellow, contact BINDER Service to replace filter elements and desiccant cartridges.

If red, contact BINDER Service immediately.

Turn off the chamber at the main power switch and disconnect the power plug.

Is the maintenance work being conducted by licensed electricians or experts authorized by BINDER?

Refrigeration System Maintenance

Is the maintenance work being conducted by qualified personnel trained according to EN 13313:2010?

Perform a leak test in accordance with Regulation (EU) 517/2014 (Article 4 and Article 10 (1) (b)).

Document all work on the refrigeration system in the service log book.

Turn off the chamber at the main power switch and disconnect the power plug.

Wear protective gloves and goggles.

Ensure no water or cleaning agents are spilled over the inner and outer surfaces.

Select cleaning agents for exterior surfaces, inner chamber, racks, and door gaskets

Select cleaning agents for instrument panel

Select cleaning agents for zinc coated hinge parts and rear chamber wall

Wipe the surfaces with a moistened towel.

Turn off the chamber at the main power switch

Ensure the chamber does not become wet during operation or maintenance

Confirm the rear panel of the chamber is not removed

Verify maintenance work is conducted by licensed electricians or authorized experts

Ensure refrigeration system maintenance is conducted by qualified personnel trained according to EN 13313:2010

Open the left maintenance access flap