WellnessSpace Brands HydroMassage Lounger L440

Test pressure bars functionality

Change massage speed and verify functionality

Launch entertainment options and verify functionality

Press green START button to begin cooling system test

Record water temperature after starting the system

Is the water temperature above 88 degrees F°?

Enter the lower massage limit if water is colder than 80 degrees F°

Position HydroMassage® unit in final location (centered on wall)

Ensure a minimum of 3' of excess electrical and cooling system wiring

Secure water lines and power cord together

Ensure water lines have enough slack to prevent bending at cooling system connections

For 440 Series models, ensure 12" of clearance from wall at head end of unit

Complete visual inspection under the lounge for water drips

Locate and remove rear casters (gray casters towards rear of frame with single wheels)

Replace the distilled water and add 2 teaspoons of Defoamacide

Add 20 gallons of DISTILLED WATER

Call 727-536-5566 for assistance if needed

Remove and wash filter for internal cooling system intake (if applicable)

Use ONLY HydroMassage Defoamacide

Select the usage level for Defoamacide addition

Select the amount of distilled water to add

Unscrew the cap on the fill spout and screw in fill tube

Add Defoamacide with distilled water