Vulcan Cooking Equipment 1036W

Remove the access panel on the left side

Remove all screws holding down the cover

Component Mounting Plate Removal

Identify components requiring removal

Remove the component mounting plate if necessary

Push one end of the heater into one socket as far as it will go.

Swing the other end of heater up until it lines up with the opposite socket.

Release heater and ensure it snaps into place.

Grasp the heater and move it back and forth to ensure that it is centered correctly.

Rotate the heater clockwise, then counterclockwise, to ensure that it is seated correctly.

Remove the access panel on the left side of the cheesemelter

Unscrew the four mounting screws

Ensure all wires are enclosed by the nylon wire clamps