Vulcan Heavy Duty Gas Griddle ASA60

Check all gas joints disturbed during servicing for leaks using a soap and water solution.

Turn the gas supply off at a manual shutoff valve.

Remove the pressure tap plug and attach manometer.

WARNING! Disconnect the electrical power to the machine and follow lockout / tagout procedures

Release igniter from frame and pull out of unit

Label and disconnect wires from electric igniter

Install igniter in reverse order

Check that all parts are in place

Disconnect the electrical power to the machine and follow lockout / tagout procedures

Shut off the gas before servicing the unit and follow lockout / tagout procedures

Check all gas joints disturbed during servicing for leaks using a soap and water solution

Thermostat Valve Assembly Replacement Steps

Remove screws securing thermostat mounting bracket to frame

Pull capillary tube out from underneath griddle plate

Unscrew thermocouple fitting from safety valve

Install thermocouple test adapter finger tight plus a quarter turn

Install thermocouple into test adapter finger tight plus a quarter turn

Connect (+) meter lead to pin on thermocouple adapter and (-) meter lead to thermocouple

Ensure the burner is turned off and cool before starting adjustments.

Loosen the screw on the venturi.

Adjust the air shutter to eliminate yellow tips on the burner flames.

Tighten the screw to lock the air shutter in place.

Is the flame blue and stable after adjustment?

Repeat the procedure for all burners if necessary.