Vestil Gantry Crane AHS-4-15-10

Ensure compliance with ASME B30.17 standard

Contact local occupational health and safety authority for applicable regulations

Verify that inspections and repairs are performed by qualified persons

Examine the I-Beam for bends, cracks, and other damage

Verify beam clamps and fasteners are properly secured

Inspect beam brackets for cracks, elongations, and warps

Check casters for cracks, warps, and ensure smooth rolling

Ensure compliance with ASME B30.17 standard

Contact local occupational health and safety authority for applicable regulations

Verify all inspections and repairs are performed by qualified persons

Compare inspection results to the RECORD OF SATISFACTORY CONDITION

Contact Technical Service department for any questions about crane condition

Unload the crane before inspection

Beam Clamps and Fasteners Inspection

Use a torque wrench to tighten each bolt and nut to 50-52 ft∙lb

Before and After Each Use Inspection

Verify beam clamps and fasteners

Inspect beam brackets for damage

Push the crane to ensure all casters are in contact with the ground and roll smoothly

Check adjustment and clevis pins

Inspect leg assemblies for damage