Toyota Forklift 60-6FDN20

Inspect head guard for cracks at welded portions

Inspect head guard for deformation and damage

Retighten for loosening of mounting in the back-rest

Inspect back-rest for deformation, cracks, and damage

Inspect the function and mounting condition of the lighting system

Inspect the function and mounting condition of the horn

Inspect the function and mounting condition of the direction indicator

Inspect the functions of the instruments

Inspect the function and mounting condition of the backup buzzer

Inspect loosening and damage of cylinder mounting

Inspect deformation and damage of rod, rod screw and rod end

Measure natural drop and natural forward tilt

Inspect for oil leaks and damage in the cylinder

Inspect for wear and damage of the pin and cylinder bearing

Inspect cylinder for uneven movement

Inspect for oil leaks and abnormal sound from the oil pump

Inspect for cracks on the distributor cap

Inspect for spark plug burning and measure the gap

Inspect for burning on the distributor side terminal

Inspect for wear and damage on the distributor cap center piece

Inspect pinion gear meshing status in starting motor

Inspect wiring harness for damage

Inspect proper starting and abnormal noise

Measure rotating condition at idling

Measure rotating condition during acceleration

Inspect PCV system for clogging and damage in PCV valve and piping

Measure no-load maximum RPM of governor

Inspect lubrication system for oil leaks

Inspect lubrication system oil level

Cups and seals for brake master and wheel cylinders replaced

Sign off on the replacement procedure